Announcement

Collapse
No announcement yet.

82/70 ss omega tek

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • john dubose
    replied
    Just so everyone knows it was an interlock related problem along with some bad pins and sockets. Thanks for all your help, just an old a2 guy trying to help.

    Leave a comment:


  • Bill LeMieux
    replied
    That's an interlock John. SC opened at first guard position causing both motors to run at the same time.

    Leave a comment:


  • Motivated
    replied
    Originally posted by john dubose View Post
    1st ball sweep goes to guard, as soon as table moves sweep runs about halfway to headpin and stops.....cam switches appear correct, chassis has been moved....any ideas?
    Have you swapped out the stator on the sweep motor?

    Leave a comment:


  • john dubose
    started a topic 82/70 ss omega tek

    82/70 ss omega tek

    1st ball sweep goes to guard, as soon as table moves sweep runs about halfway to headpin and stops.....cam switches appear correct, chassis has been moved....any ideas?

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Help-broken Part

my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...
 

Qubica VDB Battery Replacement Part 2.

Greeting all.
I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
Thanks for looking.
Bolton454
 

Pin Damage

I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...
 

Making TDM's adjustable.

I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
 

1:1 shaft wear

Hi all....I have a pinsetter that knocks over pins at times when setting new pins. The moving deck shifts very abruptly right around 270 degrees. Instead of a smooth movement,...
Working...
X