Announcement

Collapse
No announcement yet.

82/70 backend moter

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mardigras
    replied
    Re: 82/70 backend moter

    I agree clutchplate

    Leave a comment:


  • clutchplate
    replied
    Re: 82/70 backend moter

    Its possible that they are wired for 220v. You may need to swap a couple of wires.

    Leave a comment:


  • Mark_S
    replied
    Re: 82/70 backend moter

    Some do, think it depends on if it's a 50hz or 60hz gearbox or something like that anyway. I have a new jcp black one I got on the cheap, same thing.

    Leave a comment:


  • bicod
    started a topic 82/70 backend moter

    82/70 backend moter

    iv got a backend moter running low speed its brand new from jcp iv got 82/70 mach. iv tried on other mach still same prob any suggestions

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Help-broken Part

my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...
 

Qubica VDB Battery Replacement Part 2.

Greeting all.
I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
Thanks for looking.
Bolton454
 

Pin Damage

I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...
 

Making TDM's adjustable.

I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
 

1:1 shaft wear

Hi all....I have a pinsetter that knocks over pins at times when setting new pins. The moving deck shifts very abruptly right around 270 degrees. Instead of a smooth movement,...
Working...
X