Announcement

Collapse
No announcement yet.

AMF 82-70 MP Chassis

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AMF 82-70 MP Chassis

    Having a problem with a chassis. When the chassis calls for cycle, the Sweep contact connects and nothing moves.
    What I have done so far:
    1 - checked and changed any pins that appear to be bad
    2 - replaced the chassis with a good one to ensure the problem was the chassis and not the C1 plug
    3 - I have changed the Relays for the sweep and the table
    4 - I have changed the S, M and M2 relays
    5 - I have replaced the MP Board with one which has proven to be good
    6 - I have tried the chassis in a different lane to ensure the problem is within the chassis itself

    Any ideas on where to look next would be greatly appreciated.

  • #2
    Only suggestion at the moment is to put this chassis and a operating one next to it and compare the C1 plug to see if a pin has shoved in and is hiding,or you may have that mystery pin that pushes in when you plug it in.
    70's MP/PBL/LBS,Q-Score
    Prolane Walker sport

    Comment


    • #3
      Check the small white breakers on the side of the chassis to see if ones is not closed.
      AMF DOCTOR
      The doctor makes house calls.
      http://s427.photobucket.com/home/AMFDOCTOR/index

      Comment


      • #4
        Thanks, I got it. One of the pins in the C1 was indeed pushing in when I plugged it in.

        Comment


        • #5
          Thats good news that you have got it!
          There is good news and bad news here... It stinks that the chassis made you change all that BUT it should be happy for a long time now
          70's MP/PBL/LBS,Q-Score
          Prolane Walker sport

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse

          Related Topics

          Collapse

           

          Distributor Clutch Stop Blade Wear

          Replaced this stop blade on an Edge machine at a private installation I service. It looks like this after 20,000 frames. The stop blade on the machine next to it looks new after...
           

          Qubica BES-X Lane Advertising

          Anyone know if/how to replace the BES-X "station ID" graphic that shows up before and after a video ad runs on the monitors? I'd much rather have it show our logo, especially...
           

          Ball Damage at my wits end

          We have been getting ball damage on a pair of lanes and we are at our wits end trying to find the problem. Every time we think we have found it we get another ball with damage...
           

          GS-X table bolts/stud

          I know I'm not the only one who has had the table bolts literally shear off. I cannot explain where there would be a force strong enough to do this to the bolts.
          Other that...
           

          Preventative Maintenance - Jet Back Booster & A2 Accelerator Control Boxes

          I convert my booster control relays over to Plug-ins as they fail. They are the same as the Motor Start & Recycle relays which makes it very convenient.

          ...
           

          Solderless relay conversion

          Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
          Working...
          X