No announcement yet.

Stahl's "Tuffy Super Jam Stopper" in action!


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • The white belts from Stahls are the best belts for the 70's/90's. If they loose their tacky feeling hit it with a ill water and your off running. But those gripper belts work good on the 30's.


    • *** this mod may not work on the even lane ***

      As the trip rocker is on that side and this might get in the way, I don't know, haven't tried this there yet.


      • Felt the need to bump this thread.

        The jam stoppers by Stahls should be standard equipment on all 82-70's

        They work extremely well especially if your running thicker distributor belts. No need to remove the pan under the belt.

        We found when mounting to install where the rod meets the center of the belly of the pins as it rolls off the pan. With the end of the Jam Stopper rod about 3/4" above the pan about 1/2" from the edge of the pan.


        Adsense Classic 2


        Before and After

        Actuator modified to eliminate hanging Bananas. Clean and paint associated parts.


        Distributor Repair Kit

        Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

        Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

        Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...

        Pins getting gouged

        Has anyone ever had this problem of the pins getting gouged?
        I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...

        Preventative Maintenance - A Jets A2 - Pinsetter Procedures

        Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...