Announcement

Collapse
No announcement yet.

Crack on frame guide shark

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • jackleking
    started a topic Crack on frame guide shark

    Crack on frame guide shark

    Guide frame shark crack all 16 lane
    Attached Files

  • A-RON
    replied
    I keep a fully rebuilt shark and 4 spare side frames for when I decide to have a welding day. I also weld and remake the hole where the back pulley goes because if this hole starts to wear out it will give u uneven belt wear

    Leave a comment:


  • Mossyoak1980
    replied
    Hey, where did you get those overflow chutes from ? We just have the black plastic ones at our alley. Those with the carpet like material seem like they would cut WAY down on pin washing and free up chasers to do other things ...

    Leave a comment:


  • Ted
    replied
    I thought all cushion shocks were supposed to have the spring. It helps place the cushion at the right position from the ball door after impact.

    Leave a comment:


  • sbrooks
    replied
    Mine are GSX installed in 2001

    Leave a comment:


  • cyclonus
    replied
    what GS-Series is this 92??

    Leave a comment:


  • stephen_hands
    replied
    a seen you have put a spring on the shock on the ball cushion is that affective and does it help on the wear and tear on the shock

    Leave a comment:


  • sbrooks
    replied
    Re: Crack on frame guide shark

    All 20 had cracks here, I had to remove all sharks weld up and replace, rebuilt all sharks while I was at it, there is a 2 year warranty on sharks, mine were 7 years old and Brunswick offered to cover 30 % of replacement cost and I would pay shipping.

    Leave a comment:

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Oil in gutters

I have a Kustodian ion Lane machine. I have recently replaced the oil tip assembly and hose. Recently I have been noticing about every couple feet in the gutters I am getting...
 

C1 Pinout drawing

Finished the C1 drawing.

The base for this came from a drawing made by Felix dated 2006.

Thanks Felix.




If you see any...
 

CCD Processor Move by Masternut

These are pictures submitted by "MASTERNUT" of a project in his bowling center where he moved his CCD processor boards from the location on the capping to the curtain...
Working...
X