Announcement

Collapse
No announcement yet.

Trying to find part number

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trying to find part number

    Hey fellow Techs. I need this distributor part (Arrow) The corner of it broke off (Circle) All the blow ups in the Brunswick parts manual for the dual feed distributors don't look like it has this part. Can anyone help me out with a good part number? Thanks guys for any help.

    Charles

  • #2
    Check part numbers 47-095172-003 (RH Side) and 47-095173-003 (LH Side).
    Illustration is inset window on page 27J and numbers listed on 26J.

    Comment


    • #3
      Those are the right numyers but the inset window in my book shows as 1 piece and the numbers aren't in there it's the 2009 issue .

      Comment


      • #4
        Changes have been made to the drawings somewhat and updates move things around. Was/is especially important with the A/A-2 world.

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse
        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
         

        Oil in gutters

        I have a Kustodian ion Lane machine. I have recently replaced the oil tip assembly and hose. Recently I have been noticing about every couple feet in the gutters I am getting...
         

        C1 Pinout drawing

        Finished the C1 drawing.

        The base for this came from a drawing made by Felix dated 2006.

        Thanks Felix.




        If you see any...
         

        CCD Processor Move by Masternut

        These are pictures submitted by "MASTERNUT" of a project in his bowling center where he moved his CCD processor boards from the location on the capping to the curtain...
        Working...
        X