Announcement

Collapse
No announcement yet.

QSCORE Interface to GS Pinsetter

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • QSCORE Interface to GS Pinsetter

    Hey if there is anyone out there that can help me pick up the "pinsetter on" location going thru the P6-HV plug PLEASE PM me. I have attached the QAMF interface box for GS machines to pins 5-7 on that plug and hear a contactor or relay close and a LED light goes on but no power to the pinsetter.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Preventative Maintenance - A Jets A2 - Elevator & Pits

All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...
 

Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...
 

MONITOR COLOR ISSUE!!

my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...
 

Pin spot is off

I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

I'm currently trying to get all the lanes to have perfect pin spots...
 

Idler shaft

One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...
Working...
X