Announcement

Collapse
No announcement yet.

Trafo fix (47-142692-000)

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trafo fix (47-142692-000)

    One of the balldoor solenoids blew a fuse. Not only the onboard fuse but also the transformer.
    After changing the transformer I opende the broken one, and found out that there is a "little fuse" of 4A inside.
    Easy fix of $ 1,50 instead of a new transformer of $ 250,00!

    trafo1.jpg

    The "little fuse" is the small brown component on the blue wire.

  • #2
    Is that on the comman box or High voltage box sir?

    Comment


    • #3
      This is for a nexgen box.

      Comment


      • #4
        I would just like to say thank you Pinchezr! This post helped us save lots of $$.

        Comment


        • #5
          That's where this site is for!

          Comment


          • #6
            Thanks Pinchezr you're going to make my bosses happy!

            Comment

            Adsense Classic 2

            Collapse
             

            Preventative Maintenance - Brunswick All - Bearing Life

            In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
             

            Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

            Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
             

            Preventative Maintenance - Brunswick B-10's Hollar House

            Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
             

            Table support assembly

            My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
             

            Foul Light LED Mod

            Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
            Working...
            X