No announcement yet.

candlepin pit curtain


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

Adsense Classic 2


Related Topics


  • daveyg
    Pit Curtain
    We run GS98's and i was wondering if there is a stiffer pit curtain available....bowling on some amf machines i have noticed alot more pin action and pins flying from the back...
    09-30-2008, 07:14 PM
  • Mark_D
    Pit Curtain
    I have a pit curtain with the wrap around the lower rod has come undone. Anybody know a fix?
    02-06-2008, 04:54 PM
  • Orangedude
    Attaching a pit curtain
    Hi everyone.

    This is my first post (yay). I am building a candlepin alley to keep me busy until I can get a real one built in the new addition of the house (hopefully...
    06-18-2011, 09:18 AM
  • Compy
    Prototype Pit 1
    Prototype Pit 1 - This was the first prototype pit design, as you can see, there is no back space for the ball/pins to fall and separate. This section has since been modified...
    Piecing together parts to test the latest design.
    05-30-2012, 09:09 AM
  • Howard
    pit curtain differences
    ...just received a new Brunswick pit curtain and installed it. I noticed that the previous pit curtains that we have purchased, Quality brand, must be longer as they hang lower...
    11-20-2011, 12:21 PM

The New Brunswick NXT

Best Pinsetter on the market today

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...

Transformer Installation Instructions

Does anyone have the installation instructions for P/N: 12-862164-000 ?