Announcement

Collapse
No announcement yet.

Automatic durabowl bumper parts

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ninjabob
    started a topic Automatic durabowl bumper parts

    Automatic durabowl bumper parts

    Hey guys, does anyone know what the part number is for that little piece of metal with a slight twist in it on the end of the air cylinder that connects to the bracket? I can't seem to find it in any manual.

  • Tablejam
    replied
    Re: Automatic durabowl bumper parts

    Alastair, do you have a copy of the parts list/manual that you could e-mail or post?

    Much appreciate it my good fellow.

    Leave a comment:


  • Alastair
    replied
    Re: Automatic durabowl bumper parts

    Unfortunatly there are 4 mistakes on that page in the QAMF manual for the bumper parts, which doesn't make it easy when you are trying to order parts!

    Leave a comment:


  • Ninjabob
    replied
    Re: Automatic durabowl bumper parts

    Thank you so much! I have searched the land near and far for this information!

    Leave a comment:


  • laneman72
    replied
    Re: Automatic durabowl bumper parts

    It's part number is 049-007-183 and it's called an Activator Arm.

    Leave a comment:

Adsense Classic 2

Collapse
 

Before and After

Actuator modified to eliminate hanging Bananas. Clean and paint associated parts.

...
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Pins getting gouged

Has anyone ever had this problem of the pins getting gouged?
I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
Working...
X