Announcement

Collapse
No announcement yet.

Not so popular Pinsetters

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    I've put in Via, Switch, Xima as well as all the Brunswick and QAMF iterations of machines. Of the hydraulic Brunswick machines, I saw them for 3 or 4 years the BPAA show, but never saw it in operation - Excuse was something always related to software/firmware related. They could not run the machine, IMO, never showing the benefits of their marketing strategy.
    .
    .
    .
    This post is not an unpaid promotion of my business.

    Comment

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    Detector Rod Adjustment

    I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
     

    The New Brunswick NXT

    Best Pinsetter on the market today
     

    Distributor Repair Kit

    Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
     

    Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

    Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
     

    Preventative Maintenance - A Jets A2 - Pinsetter Procedures

    Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
    Working...
    X