Announcement

Collapse
No announcement yet.

Lifelong Light Ball Clutch

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lifelong Light Ball Clutch

    For the ones that didn't like these I'm looking for a cpl. for my spares anyone have any they want to sell. I've had these from the day they came out and only 1 broke so far. So if you have a spare let me know Thanks Scott

  • #2
    you still looking for some spares? let me know i have some collecting dust
    watch out, they're everywhere!

    Comment

    Adsense Classic 2

    Collapse
     

    Preventative Maintenance - Brunswick All - Bearing Life

    In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
     

    Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

    Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
     

    Preventative Maintenance - Brunswick B-10's Hollar House

    Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
     

    Table support assembly

    My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
     

    Foul Light LED Mod

    Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
    Working...
    X