Announcement

Collapse
No announcement yet.

Part Number for Spring

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Part Number for Spring

    Hey everyone,

    I’m looking for the part number for the spring that goes from the gearbox starter bellcrank to the spring hook which is mounted on the gearbox housing. Under the solenoid. I don’t see it in any of the breakdowns I have at my disposal, not sure why?

    Thanks!

  • #2
    12-100105 (A solenoid on the detector)
    12-102105 (A2 solenoid over the bellcrank)

    Going by memory here, or whats left of it.
    Last edited by Wookie8662; 06-07-2018, 08:24 AM. Reason: added A2 info

    Comment


    • #3
      Yep...it's not in the parts breakdown...good luck...
      "Don't expect too much and you'll never be let down..."

      Comment


      • #4
        It is in the hard copy parts manual, not the downloaded manual from the Brunswick site. It's on page 5, item GB61A. Kinda hard to find on that page because of where it is drawn in the exploded view. And Wookie, your memory is spot on. Those are the part numbers.
        It is wiser to find out than suppose.--Mark Twain

        Comment


        • #5
          GB61 100105 Tension spring Middle along right border in picture below
          Attached Files

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse

          Related Topics

          Collapse

           

          Oil in gutters

          I have a Kustodian ion Lane machine. I have recently replaced the oil tip assembly and hose. Recently I have been noticing about every couple feet in the gutters I am getting...
           

          C1 Pinout drawing

          Finished the C1 drawing.

          The base for this came from a drawing made by Felix dated 2006.

          Thanks Felix.




          If you see any...
           

          CCD Processor Move by Masternut

          These are pictures submitted by "MASTERNUT" of a project in his bowling center where he moved his CCD processor boards from the location on the capping to the curtain...
          Working...
          X