Announcement

Collapse
No announcement yet.

Broken ball wheel

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Broken ball wheel

    There was an article on taking it out the front somewhere. Anybody?
    If you think my girlfriend can fight, you should see her box!

  • #2
    http://www.bowltech.com/forum/pinset...arns-new-trick

    See if this works for ya. Just make sure that you have the new one in the right way before you begin locking things down. The surface of the wheel that contacts the ball is sloped towards the rear.
    It is wiser to find out than suppose.--Mark Twain

    Comment


    • #3
      That's the one. Thanks.
      If you think my girlfriend can fight, you should see her box!

      Comment


      • #4
        You're welcome. I replaced 2 wheels using this method and it is much easier than trying to pull it up through the top.
        It is wiser to find out than suppose.--Mark Twain

        Comment

        Adsense Classic 2

        Collapse
         

        The New Brunswick NXT

        Best Pinsetter on the market today
         

        Distributor Repair Kit

        Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
         

        Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

        Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
         

        Preventative Maintenance - A Jets A2 - Pinsetter Procedures

        Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
         

        Transformer Installation Instructions

        Does anyone have the installation instructions for P/N: 12-862164-000 ?
        Working...
        X