Announcement

Collapse
No announcement yet.

Clutch Reset Lever Bearing Replacement

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • emcnelis
    started a topic Clutch Reset Lever Bearing Replacement

    Clutch Reset Lever Bearing Replacement

    Checked out the bearing cross reference but couldn't find the exact replacement. Looking for a bearing number for the clutch reset lever bearing without the stud. I see that bearing number r4a is nearly identical, anyone know if that one would work? My usual distributor is out of them, so looking to find it locally. Thanks!

  • Kanga (James)
    replied
    Yes, same as the hook selector bearing.

    Leave a comment:


  • Wookie8662
    replied
    The bearings I use are R4A.
    I use those in the detector also.

    Leave a comment:

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
 

The New Brunswick NXT

Best Pinsetter on the market today
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
Working...
X