Announcement

Collapse
No announcement yet.

Clutch Reset Lever Bearing Replacement

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Clutch Reset Lever Bearing Replacement

    Checked out the bearing cross reference but couldn't find the exact replacement. Looking for a bearing number for the clutch reset lever bearing without the stud. I see that bearing number r4a is nearly identical, anyone know if that one would work? My usual distributor is out of them, so looking to find it locally. Thanks!

  • #2
    The bearings I use are R4A.
    I use those in the detector also.

    Comment


    • #3
      Yes, same as the hook selector bearing.
      Factory & Converted A-2 (US, Ger, Jap)
      Comscore ECT, Matrix & DuoHD
      Walker B, Sanction Standard, Original K, Flex Walker & Ikon
      Kegel C.A.T.S

      Comment

      Adsense Classic 2

      Collapse
       

      The New Brunswick NXT

      Best Pinsetter on the market today
       

      Distributor Repair Kit

      Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
       

      Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

      Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
       

      Preventative Maintenance - A Jets A2 - Pinsetter Procedures

      Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
       

      Transformer Installation Instructions

      Does anyone have the installation instructions for P/N: 12-862164-000 ?
      Working...
      X