Announcement

Collapse
No announcement yet.

Detector adjustment ?

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Detector adjustment ?

    I just replaced the 4-1 and put it in correctly after someone previously put it in , incorrectly now the detector shows the machine ahead , how do I adjust the detector to make the machine set back @0

    im sorry for asking I’m still learning as I go on the lanes any help would be appreciated thanks for y’all time

  • #2
    What are you using to reference the timing of the detector? If it's the timing marks on the 1:1 plate you're not going to get an accurate indication because they are only useful as a guide.
    Factory & Converted A-2 (US, Ger, Jap)
    Comscore ECT, Matrix & DuoHD
    Walker B, Sanction Standard, Original K, Flex Walker & Ikon
    Kegel C.A.T.S

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    Oil in gutters

    I have a Kustodian ion Lane machine. I have recently replaced the oil tip assembly and hose. Recently I have been noticing about every couple feet in the gutters I am getting...
     

    C1 Pinout drawing

    Finished the C1 drawing.

    The base for this came from a drawing made by Felix dated 2006.

    Thanks Felix.




    If you see any...
     

    CCD Processor Move by Masternut

    These are pictures submitted by "MASTERNUT" of a project in his bowling center where he moved his CCD processor boards from the location on the capping to the curtain...
    Working...
    X