No announcement yet.

Preventative Maintenance - A, Jets, A2 - Gearbox Clutch


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Preventative Maintenance - A, Jets, A2 - Gearbox Clutch

    Just goes to show what GREAT Prevent Maintenance can accomplish. I wonder what machine shop they took this to, to bore out the disc ? LOL

    My friend went to a center for an emergency gearbox call, yikes !!

    ALL Files Scanned with MALWAREBYTES PREMIUM Version and AVAST INTERNET SECURITY Version 19.8.2393

    Clutch BAD.jpg
    Everything has to be Somewhere !!

  • #2
    Doesnt look like it was binding to me. LOL
    It looks like there is one spline left (well half a spline) on the worm shaft.


    • #3


      • #4
        I heard from my friend who fixed it that it was still running. Only problem is, you had to turn the jukebox up a lot when the machine cycled so you could hear the music.
        Everything has to be Somewhere !!


        • #5
          The older the part, the STRONGER it is.


          Topic Starter RibbonScript


          Adsense Classic 2


          Related Topics



          Super Bowl Funday!

          This is how my day started. The note left by the night mechanic was "The cam needs adjustments. Table keeps going up and down."


          Distributor Clutch Stop Blade Wear

          Replaced this stop blade on an Edge machine at a private installation I service. It looks like this after 20,000 frames. The stop blade on the machine next to it looks new after...

          Qubica BES-X Lane Advertising

          Anyone know if/how to replace the BES-X "station ID" graphic that shows up before and after a video ad runs on the monitors? I'd much rather have it show our logo, especially...

          Preventative Maintenance - Jet Back Booster & A2 Accelerator Control Boxes

          I convert my booster control relays over to Plug-ins as they fail. They are the same as the Motor Start & Recycle relays which makes it very convenient.


          Making TDM's adjustable.

          I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...

          Solderless relay conversion

          Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...