Announcement

Collapse
No announcement yet.

Mercury switch

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mr.badwrench
    replied
    DSCF1696.JPG

    Sorry for the blurry pic. This mercury switch on a modified muffler clamp is a kit. I think it's from Zot. The only problem is that sometimes a switch will fall out of the clamp, but a little electrical tape will make sure it doesn't happen again.

    Leave a comment:


  • BG
    replied
    Awesome. Thank you for your help!

    Leave a comment:


  • mr.badwrench
    replied
    You can use a strike light switch. Wire it in series with the bowlers cycle button. Then you have two choices. Mount the switch on the rabbit eat shaft so the bowlers button won't work if the rake is down. That will stop all of what you want to stop but bowlers won't be able to cycle the pinsetter when league starts after practice if they throw that one more ball. Or if the rake is down for any other reason.

    Second choice. Mount the switch on the rake shaft. This will only stop about 90% of what is driving you nuts, but bowlers will still be able to cycle the pinsetter unless the rake is away from the stops at the front.


    c362cb18679859cf5f3a33bf21e37b5d.jpg

    This shows an old strike light switch on the rake shaft. Mounting is one cable tie and a piece of rubber hose. You could use the same mount on the rabbit ear shaft if you wish.

    Leave a comment:


  • mickeygm
    replied
    Found a Pic. They are bolted to a small plate which bolts to the 4:1

    ALL Files Scanned with MALWAREBYTES PREMIUM Version 3.8.3.2965 and AVAST INTERNET SECURITY Version 19.8.2393

    Reset Lockout Micro Switch.jpg

    Leave a comment:


  • mickeygm
    replied
    Unless I'm thinking about some other scoring, Qubica has a lockout micro-switch for the reset button. It is located under the reset linkage. Anytime the linkage "is up" the switch is open so the reset button is "locked out". The micro switch assembly is bolted to the 4:1 support plate I believe. A thin strip rests under the linkage to engage the switch when the linkage is "down" (Red Arrow)
    Maybe some here can post a picture of it.

    ALL Files Scanned with MALWAREBYTES PREMIUM Version 3.8.3.2965 and AVAST INTERNET SECURITY Version 19.8.2393

    Reset Linkage Lockout.jpg

    Leave a comment:


  • BG
    replied
    I want to lock out the reset buttons while the machine is cycling. I apologize I didn't make that clear enough. Thanks for your suggestions!

    Leave a comment:


  • Akuma
    replied
    Disable or remove the switches and make sure its turn on in Qubica to cycle the machine from the lane through the console. Keeps the kids from pressing it when a parent is bowling too.

    Leave a comment:


  • exMech
    replied
    Which issue are you trying to resolve? Do you want to keep the bowlers from pressing the reset during practice or what is the goal?

    Leave a comment:


  • BG
    started a topic Mercury switch

    Mercury switch

    Good morning.
    We have the issue with bowlers pounding the reset button during practice to get back to first ball and the solenoids going crazy, which in turn drives me crazy. We have the simple recycle relay set-up with the solenoids triggering our A's thru Qubica scoring. Can I wire a mercury switch thru the recycle relay to eliminate this issue?

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Super Bowl Funday!

This is how my day started. The note left by the night mechanic was "The cam needs adjustments. Table keeps going up and down."

...
 

Distributor Clutch Stop Blade Wear

Replaced this stop blade on an Edge machine at a private installation I service. It looks like this after 20,000 frames. The stop blade on the machine next to it looks new after...
 

Qubica BES-X Lane Advertising

Anyone know if/how to replace the BES-X "station ID" graphic that shows up before and after a video ad runs on the monitors? I'd much rather have it show our logo, especially...
 

Preventative Maintenance - Jet Back Booster & A2 Accelerator Control Boxes

I convert my booster control relays over to Plug-ins as they fail. They are the same as the Motor Start & Recycle relays which makes it very convenient.

...
 

Making TDM's adjustable.

I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
 

Solderless relay conversion

Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
Working...
X