Announcement

Collapse
No announcement yet.

Subway Vinyl Track Part Number

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Subway Vinyl Track Part Number

    Trying to replace broken vinyl track in subway return track but it seems like the only part number is for vinyl track that is 74" long(53-520095-014) but original track is much longer . original track i believe is 145" long. Anybody have any input.
    24 A-2's
    Brunswick Pro Lane
    Vector Scoring
    Kegel Kustodian
    Twister Pins
    Polychem oil and stripper

  • #2
    Chop off the busted piece with a cutoff tool where the tabs hold it in on each side and cut a new vinyl piece the same length. Works like a splice that works good.
    The older the part, the STRONGER it is.

    Comment


    • #3
      I did it that way for now but i wanted to replace the whole track if i could
      24 A-2's
      Brunswick Pro Lane
      Vector Scoring
      Kegel Kustodian
      Twister Pins
      Polychem oil and stripper

      Comment


      • #4
        i believe is 145" long. must be coal up to ship way to costly

        for that rate you can get 3-5 tracks shipped that are 74" long.
        ------------------------------------------------------------------------
        could track be AMF ? THY I had come at 60 or so ft long
        Last edited by wepauls; 03-02-2015, 02:40 PM.

        Comment


        • #5
          Once had to buy a rail section for pop up bumpers. The shipping was more than the cost of the rail. Those long sections has to be shipped special by truck.
          I'm going fishing and camping!

          Comment


          • #6
            The longer pieces were discontinued years ago.
            TSM & TSM Training Development
            Main Event Entertainment
            480-620-6758 for help or information

            Comment

            Adsense Classic 2

            Collapse
             

            Distributor Repair Kit

            Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
             

            Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

            Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
             

            Pins getting gouged

            Has anyone ever had this problem of the pins getting gouged?
            I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
             

            Preventative Maintenance - A Jets A2 - Pinsetter Procedures

            Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
             

            Transformer Installation Instructions

            Does anyone have the installation instructions for P/N: 12-862164-000 ?
            Working...
            X