Announcement

Collapse
No announcement yet.

Not so popular Pinsetters

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    I've put in Via, Switch, Xima as well as all the Brunswick and QAMF iterations of machines. Of the hydraulic Brunswick machines, I saw them for 3 or 4 years the BPAA show, but never saw it in operation - Excuse was something always related to software/firmware related. They could not run the machine, IMO, never showing the benefits of their marketing strategy.
    .
    .
    .
    This post is not an unpaid promotion of my business.

    Comment


    • #32
      [QUOTE=9-pin Kegler;n1085146]
      Originally posted by Nev View Post
      How many different Pinsetters are there

      there is a video of the FUNK free fall pinsetter: https://www.youtube.com/watch?v=WPEOCv0_9z4

      Funk = German Company. They build also string pinsetters
      For string pinsetters search for Vollmer, Schmid,
      Had never seen a full video of one of these. I like how they used T slot tubing for much of it. Looks a little overly complicated though.

      Comment


      • #33
        Here's a couple most of you have probably not seen. First is the PK1 mini-pinsetter:https://www.youtube.com/watch?v=XGD42GTMJL4 It had some issues so I changed the design and came up with the PK2 mini-pinsetter: https://www.youtube.com/watch?v=YFRg7olq77A

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse

        Related Topics

        Collapse

         

        Broken key



        Recently had to overhaul a Jap A2 gearbox. I found this shattered key to be the cause of the problem.
        Anyone wanting to have a guess at

        A) Which...
         

        MONITOR COLOR ISSUE!!

        my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...
         

        Pin spot is off

        I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

        I'm currently trying to get all the lanes to have perfect pin spots...
         

        Idler shaft

        One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...
         

        4" PVC BOW EXTENDERS

        As requested a couple pics and detail of my setup. I started installing these 2 years ago after I got tired of those rubber hose extenders that would just bend. I watched and...
        Working...
        X