No announcement yet.

Innovative vacuum jig


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Innovative vacuum jig

    We're looking at one of these presses. Would like feedback from anyone who has one or has worked with one.
    If you think my girlfriend can fight, you should see her box!

  • #2
    Is this what you looking at?
    I'm going fishing and camping!


    • #3
      Excelent machines! I like the vacu jig the most, including digital readings. I have my machine for about 11 years now and drill about 4 balls a day on a yearly basis and never had one issue.


      • #4
        Yeah, that's the one. I was always a fan of the tri-oval style jig but this one is changing my mind.
        If you think my girlfriend can fight, you should see her box!


        Adsense Classic 2


        Preventative Maintenance - Brunswick All - Bearing Life

        In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...

        Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

        Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...

        Preventative Maintenance - Brunswick B-10's Hollar House

        Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...

        Table support assembly

        My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...

        Foul Light LED Mod

        Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...