Announcement

Collapse
No announcement yet.

Pinsetter Safety Manual

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Did anyone ever work on the pinsetter safety manual mentioned here? I am starting from scratch at my center and would love to obtain copies of any relevant material.

    Comment


    • #17
      Originally posted by bowlinginthenort View Post
      Did anyone ever work on the pinsetter safety manual mentioned here? I am starting from scratch at my center and would love to obtain copies of any relevant material.
      I'm interested in this as well. It would be great to see a Bowltech Safety Manual.

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse

      Related Topics

      Collapse

       

      Bind in deck hook linkage

      I'm having a problem with the deck holding hook lifting up and not engaging the pin during 2nd ball cycle. At first, I thought it was the detector but have ruled that out. If...
       

      GS-X table bolts/stud

      I know I'm not the only one who has had the table bolts literally shear off. I cannot explain where there would be a force strong enough to do this to the bolts.
      Other that...
       

      Not scoring when ball speed "ball detection" is enabled

      I have a pair that won't score if ball detection is turned on, but when I turn it off the scoring works right away.

      On the ball speed sensor, the green light indicates...
       

      GSX pins dumping in table at front

      Hi everybody, I'm looking for some guidance. My GSX machines have a problem with pins gathering in the table in front of the #3 pinholder. One or two lanes are worse than the...
       

      Idler shaft

      One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...
      Working...
      X