Announcement

Collapse
No announcement yet.

Ball rack Ideas?

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ball rack Ideas?

    Does anybody have any ball rack ideas that I can make with wood? Would it be the same as the gutters but with a stop? -Sullivan

  • #2
    Ball return on the lane I just installed. Could easily be cut from 1/4" plywood. This was made out of 1/8" aluminum.
    Attached Files

    Comment


    • #3
      This ball rack looks pretty cool, it looks like it would go pretty good with the pvc pipe for the ball return itself.
       

      Comment

      Adsense Classic 2

      Collapse

      Related Topics

      Collapse

       

      Detector Rod Adjustment

      I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
       

      The New Brunswick NXT

      Best Pinsetter on the market today
       

      Distributor Repair Kit

      Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
       

      Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

      Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
       

      Preventative Maintenance - A Jets A2 - Pinsetter Procedures

      Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
      Working...
      X