Announcement

Collapse
No announcement yet.

Strange ball damage

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Strange ball damage

    Not my centre, so my information is limited

    Click image for larger version

Name:	1517519_718169798245375_963001558362145648_n.jpg
Views:	1
Size:	29.3 KB
ID:	888693

    It was posted on a bowling facebook group, all that is known is that it is from an AMF machine.

  • #2
    Looks like a pin in subway causing ball to rock on return track and hit side wall of underground return
    For Sale, Parachute. Only used once, never opened, small stain.

    Comment


    • #3
      Looks like belt burn. Looks like something scraped the ball instead of the ball scraping something
      Keep an eye on it see if it does it again

      Comment


      • #4
        My guess was worn lower track rail covers, and ball is hitting metal uprail.

        Pin in the underlane would cause more obvious issues to the centre with underlane ball jams.

        Comment


        • #5
          With the undergrounds I had at the last center I worked at if the pin was not on the middle of the underground return it would damage all balls thrown and never cause return issues
          For Sale, Parachute. Only used once, never opened, small stain.

          Comment


          • #6
            Looks like belt burn or ball return wheel burn up front to me.
            'Bring a roll of duct tape with ya' ... we'll get er' straightened out !

            Comment


            • #7
              We've had slimer damage.theres a pin hung on the front roller.when the ball hits that pin there's no give causing what you are seeing.seal the gap between the front carpet roller and the tail plank.

              Comment

              Adsense Classic 2

              Collapse

              Related Topics

              Collapse

               

              Detector Rod Adjustment

              I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
               

              The New Brunswick NXT

              Best Pinsetter on the market today
               

              Distributor Repair Kit

              Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
               

              Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

              Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
               

              Preventative Maintenance - A Jets A2 - Pinsetter Procedures

              Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
              Working...
              X