No announcement yet.

Rivet Tool


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Rivet tool

    This is the one sold by Brunswick.
    Click image for larger version

Name:	Rivet tool.jpg
Views:	1
Size:	34.8 KB
ID:	882454
    I'm going fishing and camping!


    • #17
      Well... That IS a snazzy little do-dad. I guess a hammer and dolly would be the long way.

      Thanks Guys,
      We leave our greatest mark on this earth with the quality of our craftsmanship.


      • #18
        The tool is needed so that the rivet can be shaped properly. If the rivet is too tight, it will cause the friction material to "curl" at the ends. This is the turret clutch that has this issue. The other friction materials can still be damaged if the rivet is too tight.

        Hope that helps.
        TSM & TSM Training Development
        Main Event Entertainment
        480-620-6758 for help or information


        • #19
          I have read many posts of tool growing legs and walking away. Has anyone really seen this? Is it kinda like a tadpole turning into a frog?


          Topic Starter RibbonScript


          Adsense Classic 2


          Related Topics



          Preventative Maintenance - A Jets A2 - Elevator & Pits

          All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...

          Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

          A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...


          my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...

          Pin spot is off

          I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

          I'm currently trying to get all the lanes to have perfect pin spots...

          Idler shaft

          One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...