No announcement yet.



Adsense Classic 2


Adsense Mobile 320x100 Right

  • Filter
  • Time
  • Show
Clear All
new posts

  • Electrical Issue, Solution Found, but thought I'd share

    Electrical Issue, Solution Found, but thought I'd share


    Had an interesting problem to say the least. Lane 21 decided to blackout. Had a look, no jams, switches all ok, fuses fine, checked main circuit breakers, it had tripped. No worries, flick it back, run the machine, all ok. 20 mins later same thing.
    So i started to have a look at a few things. Cycle the machine from the reset button, fine, tried it on 2nd ball, fine. Try again, all good. Try via rake drop, no worries, try on 2nd ball, tripped the breaker. Ok, try again, sure...
    Go to post

  • Rake Sweep Hook Tips

    Rake Sweep Hook Tips

    Click HERE for full article...
    Go to post

  • Rebuilding an electrical box (with pics)

    Rebuilding an electrical box (with pics)

    This is a before and after shot of our boxes. The rewired one has all connections that I can unplug this box and bench test it. ...
    Go to post

  • Pit Cushion Mount Repair

    Pit Cushion Mount Repair

    One of the places I work at has this issue and I am not sure how to fix this. The holes that the cushion mount go into are so egged out that they no longer hold the bolt. Apparently it's been like this for many years and now finally the mount has busted and it just hangs there.

    I see Zot and Quality has some kind of mount or fix but I am not sure if that is what I need?

    Here are some pictures to better see the problem:...
    Go to post
There are no articles in this category.
  • Filter
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Latest Articles


  • Slowing Down Pinsetter
    by Captaintenpin
    I know this has been talked about before, but I have some specific questions regarding slowing down our A-2's to A speed. We have the dual pulleys on the motors (both the gear box and elevator pulleys
    11-14-2013, 11:47 PM
  • Blue A2 Rebuild
    by MattC
    [ATTACH=CONFIG]5916[/ATTACH]Smurf Blue A2's. I switched to a lighter color blue on these machines and I think they look nicer with the gray instead of black. I'm not quite finished with these yet- waiting on new rake shafts,
    10-21-2013, 08:07 PM
  • Here are some pics:
    by Rayman
    [ATTACH=CONFIG]5869[/ATTACH][ATTACH=CONFIG]5867[/ATTACH][ATTACH=CONFIG]5868[/ATTACH](Sorry, kinda blurry. I'll take more if you need 'em)
    10-15-2013, 08:02 PM
  • Measuring deck/scissor cable length
    by wepauls
    Re: Deck cable length
    Control cable-41 1/2", two closed loops.
    Upper sissor cable-43 11/16, one closed loop, one right hand thread coupler.
    Upper moving deck cable-45 11/16", one
    10-08-2013, 10:14 PM
  • 270 stop
    by Steve Stafford (JBEES)
    The movement you are seeing is in the actuator links moving down a bit at 180?

    This can be caused by a couple of things. What style plunger lever are you using? Stamped version or the original
    10-05-2013, 06:20 PM
  • Gearbox Rebuild
    by JohnSebeny
    [ATTACH=CONFIG]5722[/ATTACH] How would I go about removing that bearing at the end of the shaft (or is it even possible?) CLICK HERE TO VIEW THREAD
    09-09-2013, 12:47 PM

Adsense Tower Right