Idea is to re-use as much as possible, while cleaning them up and making them reliable. Still need to get pics of wire channel repair...... Side note: Scoring will be Steltronic. Since counter switches aren't...
-
Budget Box Build
-
Created by:
Ritzmech
Budget Box Build
Keep in mind, these pinsetters have been in storage for about 8 years, shuffled between 2 storage units. Spent a few days outside in the process. Getting them prepped for a new install. Wasn't really planning doing much with the electrical, until I inspected it.
Idea is to re-use as much as possible, while cleaning them up and making them reliable. Still need to get pics of wire channel repair...... Side note: Scoring will be Steltronic. Since counter switches aren't... -
Created by:
-
Gold Crown Masking Units & Crown Imperial Ball Return Installed Pics
In reference to my previous post about the Gold Crown Masking units, I have just finished installing them along with the old Crown Imperial surface return. We put new Anvilane, Bankshot gutters, and 2 of my rebuilt A2's with them. The entire room will have a 50's decor, right down to the old interlocking tile style ceiling. They are still working on finishing up some general construction on the room but the bowling equipment is all done. I thought this was worth sharing with everyone because you...
-
Brunswick Red Crown Pin
-
Created by:
weberchip64
Brunswick Red Crown Pin
that's absolutely stunning! what you should do to really finish it off is to find some retro Brunswick crowns like this...
-
Created by:
-
Masking units and curtain walls
-
Created by:
Ken-Cliff Lanes
Masking units and curtain walls
AMF's first commercial installation (1951) shows curtains above the "Pinvisor screens"....
-
Created by:
-
Table temp repair...
-
Created by:
deleted2018-12-02
Table temp repair...
Had a table crack in the usual place(shocker) no welder, don't have time to take it out go have it welded put back in etc... I'm not a fan of the table repair kit Brunswick sells but I install one anyway... And put a brace on it with self tapping screws... I think it will definitely hold up better specially if I welded it.. Lol...
-
Created by:
-
Prayers for Lonnie
-
Created by:
Mike Wilson
Prayers for Lonnie
My heart is broken. What a tragic loss.
A truly wonderful person has left us. Lonnie was one of the kindest and most trustworthy people I have ever met.
Rest in Peace my friend.
... -
Created by:
-
The Famous A2 Pics by Masternut
-
Created by: Mike Wilson
The Famous A2 Pics by Masternut
I am sending pictures of our center that we took the machines apart and rebuilt ourselves,I worked 2years on the various assemblies and rebuilt the electrical boxes as well.We stripped the pinsetters all the way down and painted them with automotive paint.
Originally uploaded by Masternut... -
Created by:
There are no articles in this category.
Please log in to your account to view your subscribed posts.