Technical Documents & Video

Tablejam's Tech Tip #4: "The 'Missing' Link"

Created by: Tablejam

Published: 11-21-2020, 04:41 PM

7 comments
Tablejam's Tech Tip #4: "The 'Missing' Link"

This time it will be a video presentation

...

Go to post
Spoon Bumper Stop

Created by: smurtland

Published: 10-07-2017, 12:25 AM

0 comments
Spoon Bumper Stop

I think this is what you are talking about....

Go to post
Auto sweep reverse

Created by: Ted

Published: 10-07-2017, 12:25 AM

0 comments
Auto sweep reverse

Here's the wiring changes for the C1A to sweep motor....

Go to post
ball door lock

Created by: Miller fu

Published: 10-07-2017, 12:25 AM

0 comments
ball door lock

Strengthening of the ball locks
Sometimes, after adjustment, the goal will continue through next to the ball bolt, or because of the impact is too large, resulting in the ball bolt bending by

All Photo 19P...

Go to post

Previous template Next

There are no articles in this category.

Mark This Channel Read

BE Control Box By Kat

by Kat

[ATTACH=CONFIG]6229[/ATTACH]This is how our BE control boxes are setup.

We have added TB override, Out of Range toggle, Table Run Switch, Qubica TCS.
- Channel: Technical Documents & Video
12-15-2013, 02:49 PM
Advantage (XENIX) Daylight Saving Time Fix

by deb

Still changing your system clock four times a year since DST changed in 2007? Here's the fix to make the clock change automatically like it did before the law changed.

Log in as root. This
- Channel: Technical Documents & Video
10-17-2013, 04:00 PM
Vantech Ball return part#

by Ross Gibson

Clutch, here is a parts breakdown for the Back Saver lift

[ATTACH=CONFIG]5059[/ATTACH]
- Channel: Technical Documents & Video
06-12-2013, 07:34 PM
Power Lift Wiring Diagram

by Steve Stafford (JBEES)

Here you go...see if this helps. If you have any questions...let me know.

[ATTACH=CONFIG]5058[/ATTACH]
- Channel: Technical Documents & Video
06-12-2013, 07:30 PM
Ball Accelerator Cubes

by cuda96

I just finished the last of my accelerator boxes last week. I used the 5EMG4 relay and 1YAX4 base for mine as the 5X853 base makes the relay stick up beyond the height of the box.
With this relay
- Channel: Technical Documents & Video
04-27-2013, 11:32 AM
NPS - New Pin Solenoid

by Steve Stafford (JBEES)

You can mount the relay in the electrical box for the pinsetter and have it supply the needed voltage to the cord already going to the NPS box. You just need to remove the wiring from the relay that is
- Channel: Technical Documents & Video
03-23-2013, 12:32 AM

If you can not agree to any of these terms of use above or are not at least 18 years of age you are asked NOT to visit Bowl-Tech or utilize its content. To visit the Bowl-Tech Terms of Service and Rules CLICK HERE

Announcement

Technical Documents & Video

Adsense Classic 2

Adsense Mobile 320x100 Right

Tablejam's Tech Tip #4: "The 'Missing' Link"

Tablejam's Tech Tip #4: "The 'Missing' Link"

Spoon Bumper Stop

Spoon Bumper Stop

Auto sweep reverse

Auto sweep reverse

ball door lock

ball door lock

Categories

Latest Articles

Adsense Tower Right