Announcement

Collapse
No announcement yet.

AMF Communications Connector

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ptackett
    replied
    Holy Moses! Thank you DBZodos! You've unlocked the last piece of the puzzle! I checked out the thread and you are correct, it's an SDL connector. In the process of locating a TE or Amp PN, once I find it and pricing I'd like to add to this thread just in case someone else may have the same issue...Cheers! Phil

    Leave a comment:


  • DBZodos
    replied
    Is that the cable that plugs into the MCU? Per Ted's reply in another post, it is called an SDL connector. I was troubleshooting our MCU recently and had a "what the heck is this?" moment when I checked the cabling.

    http://www.bowltech.com/forum/pinset...u-installation

    Leave a comment:


  • ptackett
    started a topic AMF Communications Connector

    AMF Communications Connector

    Good evening. I've been tasked to replace some connectors at a local bowling alley and I'm trying to find a PN for them. I've been in the communication industry for over 30 years and have yet to see anything like this. Hopefully someone will recognize it. Thank you. Phil

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Help-broken Part

my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...
 

Qubica VDB Battery Replacement Part 2.

Greeting all.
I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
Thanks for looking.
Bolton454
 

Pin Damage

I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...
 

Making TDM's adjustable.

I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
 

Gold Crown Masking Unit

Here are some photos of a Brunswick Gold Crown single masking unit that I refurbished. I stripped off the old orange vinyl skin and used it to make a template for the new green...
Working...
X