Announcement

Collapse
No announcement yet.

AMF total set up help

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AMF total set up help

    Hi all ! hope all are well in these times ? I'm new to this forum and thanks for having me .A little info about myself , I recently decided to set up a bowling setup at home after finding one of the local AMF centre had closed down . I purchased the entire 4 lane set up including scoring computers and pinsetters . Even got a lane polishing machine Anyhow my problem is I have never in my life set anything like this up and don't have a clue where to start ? Im quiet good with electronics etc , we got all the lanes fitted with the pinsetters, ball returns and bumpers. It is a bit of an older unit but i don't know how it works or where anything plugs in ? through pressing buttons we managed to get the pin mechanism to round up the pins and also pick them up , also got the ball to pick up and be returned back to the front . i live in Australia and any info/help will be greatly appreciated . I have been through the manual that came with it but it only explains about the pinsetter and nothing on the scoring system and how it all works together. i have attached some pics so you can have an idea of what i have. Even a rough diagram will be very useful. Where the camera plugs in , etc etc .FYI I only fit 2 lanes and decided to use all the other equipment for spare parts .Also I don't know any of the passwords in the system .
    Thanks in advance Bernie

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Help-broken Part

my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...
 

Qubica VDB Battery Replacement Part 2.

Greeting all.
I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
Thanks for looking.
Bolton454
 

Pin Damage

I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...
 

Making TDM's adjustable.

I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
 

Gold Crown Masking Unit

Here are some photos of a Brunswick Gold Crown single masking unit that I refurbished. I stripped off the old orange vinyl skin and used it to make a template for the new green...
Working...
X