Announcement

Collapse
No announcement yet.

Boss keypad and camera cutting out

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Boss keypad and camera cutting out

    Hi, boss system with accuscore cameras, having issues with a pair of lanes, the after a few presses the keypad freezes and the lights on the camera go off causing it to fail to score. After about 10 secs it seems to start working again, but only for a few more presses. Noticed the orange led on the board under keypad flashes then the red one flashes, this is when it freezes. I have tried swapping boards, keypads, mpu, interface, checked cables best I can, disconnected camera incase it was causing some sort of short,but nothing seems to have made a difference,any ideas what could be causing this as its doing my head in.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Stahl's "Tuffy Super Jam Stopper" in action!

So I decided to try a few of these, I mean the idea totally makes sense and recently I saw these in action and liked what I saw.

Basically, it's meant as an extension...
 

Roller Clutch issue

Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...
 

Pictures of new machines being installed...

Here are the accelerators and pits that came with the lanes, kickbacks, gutters, power lifts.



This a new way of building the supports for the lanes...
 

Baddest Tool Chest In Town

Adios, motor boater!

...
 

check this jam...

the ball stuck the table up

...
Working...
X