Announcement

Collapse
No announcement yet.

Accuscore XL camera height

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Accuscore XL camera height

    Back at a center that have Accuscore XL. Nine years ago we had a height gage for the cameras, that is no longer to be found, none of the cameras are at the same height. does any body know the measurement form the lane the camera, I can make my own. I do not recall were the measurement is on the camera, say the bottom or top or center of the camera lens.

  • #2
    9 5/8 from lane to center of the lens. It may have to be higher and looking a bit down if you have wood pin decks that trail down in the back.
    .
    .
    .
    This post is not an unpaid promotion of my business.

    Comment


    • #3
      Thank you.

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
       

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
       

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...
       

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
       

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...
       

      Another pivot bearing broke.

      One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
      Working...
      X