No announcement yet.

BOSS hardrive issue


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • BOSS hardrive issue

    I have BOSS version 9.1, equipment install 2003. I have a lane pair whose monitors will not turn off from the front desk. Normally I reload the software into the hard drive and the problem will go away. I have now reloaded the software 3x with a server load complete message and cannot get the monitors to turn off. Had a brilliant idea, maybe I'll try the spare that has been sitting in a box since I bet 2005. I keep getting a server load falied on this hard drive. It says check communication and reset scorer. Is my reboot software on my floppy drive not working seeing I cannot get the first hard drive to shut the monitors off and it won't load into the second? Or am I missing something here?

  • #2
    I am having the exact same problem with server load failed. Have you made any progress? I have tried my floppy on 4 spares and they all hang up with this error.


    Topic Starter RibbonScript


    Adsense Classic 2


    Related Topics



    A2 1 to 1 Gear Box Cover Replacement Due to Crack

    I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...

    Streamlane Mask Halo Lights

    With huge thanks to "Toby" for all his help & old masks now have for-real halo lights again.


    Hybrid (and EcoFriendly) Bumpers (2012)

    It's been about 10 years since we first tried this - 46 lanes and still working fine, auto air bumper cylinders on the BankShot bumpers. Here are videos of a home install with...

    Baddest Tool Chest In Town

    Adios, motor boater!


    Aluminum Repair and Welding

    with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.

    Setting Table Harness Connections

    Hi, guys.

    We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...