HELP!!!!

[obdll]

A2 with Accuscore all chassis are 7500 last one 7150
came in today and whole house is in stand alone tried resetting every thing numerous times powered down whole system have a full house now turned on all scorers at bowler terminal to get through the night i have 2 pairs only 1 monitor came up on firs question is there a command at bowlers terminal to do split screen so i can have those teams bowl
next Help!!! what do i try next to get the system up and running any ideas

[chrisw]

holy christmas I have almost the same thing going on, still cant figurer it out!!!!!!!!!

[obdll]

lol i shouldn't have even got up this morning

[chrisw]

last pair of league finishing up, then the fun begins. I think it is gonna be a long night.........

[obdll]

Same here good luck I'll let you know if I find anything

[chrisw]

I FOUND mine bad j3-j4 cable!!!!!!!!!!!!!!!!
I had no communication on the cwc's
if you have a spare try it, you may like it

[toon30s]

Start unplugging J3 and J4 cables that run between each CWC. Cold start the first CWC after the homerun cable, then connect one at a time until you find the problem. I will bet on a bad CWC or cable. Let us know what you find.

[obdll]

2:17 am got it fixed turned out to be a bad chassis at end of line once found reboot and good to go