No announcement yet.

Accuscore Logo Screen


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Accuscore Logo Screen

    Can anyone tell me how to change where it says the center name on the logo screen. We have Accuscore and advantage. I changed the full screen message in advantage but it doesn't show up on the screen. Any help would be great.

  • #2
    It's not a meggage you change. It's a menu item in the back office. I can't recall the steps to get there, but when you change it in the back office, it wont take effect until you cold start the curtain wall chassis. All of them.
    This post is not an unpaid promotion of my business.


    • #3
      SPF / Special Functions - System Configuration - Set Center name


      • #4
        I forgot to say:
        A) The front desk only sends the center name to the scorer when it establishes communications.
        B) The task that sends the center name to the scorer won't see the new center name until it's restarted.

        Because of timers in the scorer, I recommend you
        1) change center name
        2) put all the lanes in standalone
        3) reboot Advantage
        4) take the lanes out of standalone


        Topic Starter RibbonScript


        Adsense Classic 2

        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

        Well this is a first.

        We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

        Ball return wheel guide roller removal.

        Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

        Even old mechanics find something new.

        All my years working on these things I never had this happen…… until last week. ...

        82-90XL Frontend Gearbox Parts - Rebuild Woes

        We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

        Prolane damage

        Can this be repaired?

        LED Ball Lights

        Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...