Announcement

Collapse
No announcement yet.

Accuscore + screens

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Accuscore + screens

    So I have been doing some research and I have seen a couple posts on here. I have a 10 lane center, and am wondering if it would be more cost effective to just upgrade the 13" Wells Gardner Lowboys to lcd's? As of right now we need at least 8 new monitors...I see that you need a conversion board, but which is best? Would I just buy a 13" lcd tv and take off the plastic edges to make it fit? I am finding people selling the lowboys for like 250...Has anyone converted there lowboys to lcd's, and able to give any advice?

  • #2
    You could talk with these folks...

    http://repairandexchange.com/

    They may have a solution for you.
    TSM & TSM Training Development
    Main Event Entertainment
    480-620-6758 for help or information

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
     

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
     

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...
     

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
     

    Prolane damage

    Can this be repaired?
     

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
    Working...
    X