Announcement

Collapse
No announcement yet.

Not cycling machine

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dothan
    replied
    ok thanks I'll look at that.

    Leave a comment:


  • Timg
    replied
    what switch there is a orange wire and a blue wire that run from the camera to the machine usually to a cherry switch if that switch isnt in the correct position there will be a led lit on the camera board which blocks the solenoid from signaling the machine to cycle. on off and cycling are all done from the camera board

    Leave a comment:


  • dothan
    started a topic Not cycling machine

    Not cycling machine

    8270 MP chassis, vector scoring, not cycling machine. When you break the beam it does score. Had to reattach the switch for cycling.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
 

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
 

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...
 

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
 

Prolane damage

Can this be repaired?
 

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
Working...
X