Announcement

Collapse
No announcement yet.

Vector Scoring loadcomp crashing

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vector Scoring loadcomp crashing

    My center has had issues for the past little bit where our front desk computer can no longer communicate with the slave1 scoring computer. Up to this point, we have just been resetting the scoring computer and it fixes itself for a time. In an attempt to permanently solve this problem I have connected a mouse and monitor to the scoring computer to see if I could spot any issues, as it turns out a program/process called "loadcomp" is crashing and this is what causes the front desk to lose communication and reopening this program reconnects it. So I was hoping that someone on here might know how to stop loadcomp from crashing or maybe any other solutions. Thanks for the help guys.

  • #2
    Can you copy it over from another hard drive, or just replace the drive?

    Comment


    • #3
      That's probably my best bet at this point I don't currently have a back up drive but I can at least swap around and check.

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Well this is a first.

      We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
       

      Ball return wheel guide roller removal.

      Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
       

      Even old mechanics find something new.

      All my years working on these things I never had this happen…… until last week. ...
       

      82-90XL Frontend Gearbox Parts - Rebuild Woes

      We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
       

      Prolane damage

      Can this be repaired?
       

      LED Ball Lights

      Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
      Working...
      X