Announcement

Collapse
No announcement yet.

Continuous Ball Detect

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Continuous Ball Detect

    Have an even lane with continuous ball detect. Then no ball detect on both lanes. Swapped camera with working pair no ball detect both lanes. Stuck. Need help. Vector Plus with 8270s.

  • #2
    Found problem. Turned out to be defective pin in 9 pin camera to scorer computer cable.

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    A2 1 to 1 Gear Box Cover Replacement Due to Crack

    I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...
     

    Streamlane Mask Halo Lights

    With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.


    ...
     

    Baddest Tool Chest In Town

    Adios, motor boater!

    ...
     

    Aluminum Repair and Welding

    with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
    http://aluminumrepair.com/...
     

    Setting Table Harness Connections

    Hi, guys.

    We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...
     

    check this jam...

    the ball stuck the table up

    ...
    Working...
    X