Announcement

Collapse
No announcement yet.

as 80 lower console

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • as 80 lower console

    I have a lower console that when you enter the names and when you push bowl the screen on the lower goes blank
    for a second and when it comes back on the names disappear and the only thing showing is the score sheet and the
    overheads are fine.Any ideas what would cause this?

    Thanks Ron

  • #2
    Have you tried exchanging key pad or tray ?

    Mike
    DO A NEAT CLEAN JOB, AND FIX IT RIGHT THE FIRST TIME. THE ONLY WAY TO WORK.

    Comment


    • #3
      I have swapped out the tray completely and the keypad seems to be working fine.

      Ron

      Comment


      • #4
        But did you change out the keypad? If the keypad shorted out it could possibly cause this issue.
        Sometimes we have to do stuff to get by....Just go back and do it right when the "by" has passed!!

        Comment


        • #5
          If the keypad was shorted out then would it not work also?The only time I have changed the pad when it completely quite working.
          I forgot to mention when I cut the console off and power back up and hit the clear button it will work fine until it is given back
          out again.

          Ron

          Comment


          • #6
            I tried two different keypads with the same results.

            Ron

            Comment

            Topic Starter RibbonScript

            Collapse

            Adsense Classic 2

            Collapse
            widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
             

            Table cutting off before the end of the cycle

            I have one lane that has been giving me trouble lately. It used to be every once in awhile but now it is happening every cycle. Start 1st ball cycle, sweep drops does the usual...
             

            ETU diagnostic tool

            I've posted before about wanting to try and figure out how to fix these trigger boards we have. I'm trying to map the thing out and create a schematic, but it's slow going, especially...
             

            Gutter Straps

            Hey everyone, I hope someone can direct me in the right direction. I'm looking to find either a part number or someone willing to part with some.gutter straps. I have plastic...
             

            AMF 82-90XL BE Gearbox seals part number cross reference.

            I have spent a few hours cross checking part numbers for my 82-90xl's Back end gearboxes. I have found that most auto part stores carry these seals for a fraction of the price...
             

            Roller Clutch issue

            Has anyone had to remove the plastic ring in the back side of the plate in order to achieve good indexing? I now have 2 roller clutches without the backing rings in service. Either...
             

            Another pivot bearing broke.

            One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
            Working...
            X