Announcement

Collapse
No announcement yet.

42" flatron lg upper monitors

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • djdemarce
    replied
    Did you ever figure out the problem?

    DJ

    Leave a comment:


  • djdemarce
    replied
    We use that same monitor. What do you mean they went out, is the power led in the lower right front off completely or yellow! Can you turn them on manually using the remote control or by the power switch on the back panel? If a whole bank of 8 went out I would suspect a circuit breaker. Make sure you have AC power to the outlets.

    DJ

    Leave a comment:


  • kegal300
    started a topic 42" flatron lg upper monitors

    42" flatron lg upper monitors

    Does any one know how to get power saving mode off of thes tvs i have 16 lanes and 8 went out

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Help-broken Part

my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...
 

Qubica VDB Battery Replacement Part 2.

Greeting all.
I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
Thanks for looking.
Bolton454
 

Pin Damage

I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...
 

Making TDM's adjustable.

I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
 

Gold Crown Masking Unit

Here are some photos of a Brunswick Gold Crown single masking unit that I refurbished. I stripped off the old orange vinyl skin and used it to make a template for the new green...
Working...
X