Announcement

Collapse
No announcement yet.

Duo upgrade, monitor preference

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kanga (James)
    replied
    We have installed TCL TV's here in AU as suggested by Comscore. There is usually a technicians menu that allows you to alter the power up behaviour. If not there's always a way around it with a little technical know how

    Leave a comment:


  • Dustinpins
    started a topic Duo upgrade, monitor preference

    Duo upgrade, monitor preference

    Upgrading to Duo in 6-8 weeks and wondering what monitors (TV) people are using. Going with 55" (have this size in other center) and needs to come on when power is supplied not needing a remote to turn on. Any suggestions?

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
 

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
Working...
X