No announcement yet.

Conqueror loading error


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Conqueror loading error

    So this just started today

    Any ideas?
    You do not have permission to view this gallery.
    This gallery has 1 photos.

  • #2
    Could it be the wrong IP address for the server?

    That looks like the IP address for a router.

    Maybe change the server path if you can.


    • #3
      It's on its own little network all by itself with only a network internet. It has worked for years like this without any issue. We had a weather related power outage and then this started. Probably hardware related


      • #4
        Have you tried rebooting the network?
        9th Amendment!


        • #5
          Originally posted by pitman2 View Post
          Have you tried rebooting the network?

          The problem is resolved....had to reinstall Conqueror.


          • #6
            May want to install a UPS (Uninterruptible Power Supply), and a high end Surge Protector.
            Everything has to be Somewhere !!


            • #7
              Originally posted by mickeygm View Post
              May want to install a UPS (Uninterruptible Power Supply), and a high end Surge Protector.
              Funny part about that is there used to be a UPS but it malfunctioned during league a while back and never was replaced. Better put that on my to-do list!


              • #8
                I purchased a 4000 joule surge suppressor from Home Depot and the UPS from Best Buy. The UPS does have surge suppression built in so the extra surge suppressor is just overkill but when it comes to protecting all your POS gear and Tvs, why not. Also current Electric Code mandates that a surge suppressor Must be installed on all new residential panels.
                Everything has to be Somewhere !!


                Topic Starter RibbonScript


                Adsense Classic 2

                widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

                Well this is a first.

                We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

                Ball return wheel guide roller removal.

                Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

                Even old mechanics find something new.

                All my years working on these things I never had this happen…… until last week. ...

                82-90XL Frontend Gearbox Parts - Rebuild Woes

                We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

                Prolane damage

                Can this be repaired?

                LED Ball Lights

                Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...