Announcement
Collapse
No announcement yet.
Strange Screen Problems
Collapse
Adsense Classic 1
Collapse
TOTY
Collapse
X
-
Strange Screen Problems
Hey guys i'm having a strange problem with my monitors on lanes 9 and 10. I have Qubica scoring and Brunswick A's. now the problem is the screens they display the info right but after starting to bowl the screen starts to skew. I've had do it in a few different ways the top will show up on the bottom, when it switches bowlers the enlarged lines stay were they were to create a grid look. I've looked on here and so far i've found no one with this problem. any help would be greatly appreciated also i have never worked on the scoring system so im very new to this part of the alley. -
Swap your RDB,VDB,3QT to another lane and see if the issue follows. If you are not sure what this is...it is the main computer on that pair. Not knowing what version you have, I can't point you directly to it. RDB or VDB should be in between the monitors...the 3QT is mounted in the back by your 6BOX/FBOX.TSM & TSM Training Development
Main Event Entertainment
480-620-6758 for help or information
-
Have you been rebooting everything on a regular basis ? (at least weekly) Does this follow a certain league or all the leagues that bowl on that pair.?
Marty - Pro Bowl West56 Jap A-2's Qubica VDB's
2 Kustodian Walkers
Comment
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
MP Chassis Tester
Good morning,
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
I am using relays. My question is to anyone that may...
Preventative Maintenance - As, Jets, A2s - LEDs
Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.
www.ledsupply.com...
www.ledsupply.com...
4:1 Timing off..
*sigh* Hello friends..
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....
Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.
Left a rant about this in the bowling forum…
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....
Turret clutch rebuild
At what thickness do you replace the clutch face.
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Is there a minimum dimension from the clutch face to the rivet.
Thanks...
Solderless relay conversion
Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...
Comment