No announcement yet.

Qubica Fenice 38" monitor board


Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • Qubica Fenice 38" monitor board

    So far Qubica has sent me the wrong boards three times in a row. So, now I will ask people that actually know what is going on.....I'm referring to you guys by the way.

    What I need is a 38" Fenice monitor board that does NOT have the individual adjustments integrated onto the board. I need the board that is controlled by the external remote that is built into the monitor case. Does anybody have a part number for me? Maybe even a picture so I can confirm that this is what I actually need??

    Thanks in advance!!!
    I knock things down then pick them up.

  • #2
    MON-BOA-38COIR/110 for 110v
    MON-BOA-38COIR/220 for 220v


    • #3
      Thank you! That is exactly what I need!!!!
      I knock things down then pick them up.


      • #4
        To bad they are 38" ones. I have a bunch of the 34" ones we just pulled out.


        Topic Starter RibbonScript


        Adsense Classic 2

        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

        MP Chassis Tester

        Good morning,
        I have built a tester for the MP Chassis for the 82-70 machines. Instead of using the cam switches
        I am using relays. My question is to anyone that may...

        Preventative Maintenance - As, Jets, A2s - LEDs

        Those of you looking for new LED lighting ideas may want to check out this site. Lots of stuff.

        4:1 Timing off..

        *sigh* Hello friends..

        I had a 4:1 go bad and I've never seen or done one before. Trying to search the depths of the forums, YouTube videos, it didn't seem too bad....

        Adapting the Bluffton end cap & terminal board kit to Franklin BE (and FE) motors.

        Left a rant about this in the bowling forum…

        I’ve already repaired a a number of Franklin FE motors using the Bluffton-style end cap and terminal board kit (090-004-582)....

        Turret clutch rebuild

        At what thickness do you replace the clutch face.
        Is there a minimum dimension from the clutch face to the rivet.


        Solderless relay conversion

        Is anyone running the solderless relays on the accelerators? How do you like them? What brand? How difficult to convert was it? Would love the feed back as I'm about to switch...