Announcement

Collapse
No announcement yet.

INTERFERENCE IN SKIBA

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • INTERFERENCE IN SKIBA

    CAMERA WORKED 4 YEARS
    APPEARED INTERFERENCE
    SORRY FOR QUALITY PHOTOS

    Who can help?
    the only problem in the camera

    with respect for Pavel25062012551.jpg25062012550.jpg

  • #2
    I think I'd try taking the camera off the mount and swapping it with one on a working pair of lanes before I'd change the entire camera base.
    See if a camera alone changes the pin alignment.
    As fas as i know, only Steltronic can repair which ever part is bad.
    .
    .
    .
    This post is not an unpaid promotion of my business.

    Comment


    • #3
      Purchased a new oscilloscope OWON SDS7102V

      And immediately all the fix !!!

      Thank you for your attention

      BEST REGARD
      Pavel

      Comment


      • #4
        And immediately all the fix !!!

        Purchased a new oscilloscope OWON SDS7102V

        And immediately all the fix !!!

        Thank you for your attention

        BEST REGARD
        Pavel

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse
        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
         

        Well this is a first.

        We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
         

        Ball return wheel guide roller removal.

        Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
         

        Even old mechanics find something new.

        All my years working on these things I never had this happen…… until last week. ...
         

        82-90XL Frontend Gearbox Parts - Rebuild Woes

        We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
         

        Prolane damage

        Can this be repaired?
         

        LED Ball Lights

        Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
        Working...
        X