No announcement yet.

Site Upgrade


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Site Upgrade

    Thanks for everybody’s patience today. I did have the site down for a couple of hours on a software upgrade.

    We were about 3 versions behind, this is the first major update since we switched over the to the vBulletin software a few months ago. This catchup update fixed well over a 100 bugs.

    While there are no new features some enhancements were made to make future growth and new additions much easier.

    The biggest changes you will see are listed below.

    New Shoutbox software – This is a completely new version of one we tested several months ago that is much better supported now.

    New Login Menu – The login process has been cleaned up. The advertising banner at the top of the page has been moved down to just below the navigation bar allowing some room at the top of the page for the login box. So you won’t have to scroll down a half a page any longer to get logged in.

    And it does appear that the Birthday notification is now working.

    I’m certain over the next few days we will find more items that are working differently or better.

    If you find anything that does not seem right please let me know.
    Mike Wilson
    Bowl-Tech Inc.

Topic Starter RibbonScript


Adsense Classic 2


Related Topics



A2 1 to 1 Gear Box Cover Replacement Due to Crack

I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...

Streamlane Mask Halo Lights

With huge thanks to "Toby" for all his help & old masks now have for-real halo lights again.


Hybrid (and EcoFriendly) Bumpers (2012)

It's been about 10 years since we first tried this - 46 lanes and still working fine, auto air bumper cylinders on the BankShot bumpers. Here are videos of a home install with...

Baddest Tool Chest In Town

Adios, motor boater!


Aluminum Repair and Welding

with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.

Setting Table Harness Connections

Hi, guys.

We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...