No announcement yet.

Thank You exMech

  • Filter
  • Time
  • Show
Clear All
new posts

  • Thank You exMech

    For the month of June 2021 we will recognize exMech (Mark) for his outstanding contributions to the Bowl-Tech Community.

    Please CLICK HERE to see the official announcement and learn more about exMech. Again it was another close month with exMech edging out TheLegend in points for this month.

    Points are accumulated by members clicking the LIKE link at the bottom of posts that are the most helpful and contain technically sound information.

    Members recognized on the monthly basis are also automatically nominated for the Tech of the Year award given by Bowl-Tech and voted on by fellow members.

    Special thanks to Kanga (James) , Louie_IV and mr.badwrench who were the runners up.

    Everybody, please keep supporting our community by helping recognize those who provide great advice by clicking the LIKE link at the bottom of helpful posts on Bowl-Tech, it is the least we can do for those who take the time to selflessly support other members.

    Thank you all so much!

    Mike Wilson
    Bowl-Tech Inc..

  • #2
    No surprise there. ??????

    Congrats exMech
    Factory & Converted A-2 (US, Ger, Jap)
    Comscore ECT, Matrix & DuoHD
    Walker B, Sanction Standard, Original K, Flex Walker & Ikon
    Kegel C.A.T.S


    • #3
      CongratsexMech and thanks for sharing your knowledge.


      • #4


        • #5
          Winner winner chicken dinner. Or steak is good too.

          Thanks to those for clicking the like button. Admittingly something I am horrible at doing. It really lets the posters know their efforts are appreciated. But even more so, if you start a post, make sure to stop back and let us know what you found out. It gets frustrating when you take time to post a reply to a question and then it seems to just die and you don't know if your efforts were for nothing. And I think that all the posters here appreciate knowing that what they do is worth the efforts to put into them. The like button is just one small way of doing that and is sometimes the only feedback we get.

          Congrats to the runner ups. Without a doubt, you are just as worthy as I. Stay safe everybody.


          • #6
            Congrats exMech!
            let me be myself


            • #7
              Congratulations exMech!


              • #8
                Good job and congrats!


                • #9
                  Sometimes being the oldest has its own rewards.......... Congrats


                  • #10



                    Well this is a first.

                    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

                    Ball return wheel guide roller removal.

                    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

                    Even old mechanics find something new.

                    All my years working on these things I never had this happen…… until last week. ...

                    82-90XL Frontend Gearbox Parts - Rebuild Woes

                    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

                    Prolane damage

                    Can this be repaired?