Announcement

Collapse
No announcement yet.

ION question

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ION question

    Drive motor fuse (10A) keeps blowing on the ION. Any suggestions?

  • #2
    Check motor brushes, and drive chains.

    Comment


    • #3
      Once, I had the squeegee blade come out partially - enough to get caught under one of the drive wheels - blew the drive motor fuse

      Comment


      • #4
        what i have found is that the fuse holders go bad and short out so i have replaced most fuse holders on my ion i think the oil must corrode or weaken them
        im never wrong just askme

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse
        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
         

        Rake sweeping out of time, and pin launching onto lane.

        I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
         

        Strange sweep problem

        I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
         

        GSX Distributor shaft bearings

        Two part topic:
        1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

        2. ANY of these bearings with the black support mount...
         

        The Legacy of the A2

        I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
         

        Table turning on short stroke.

        Hello dear Bowltech members.
        First let me say thank you for your time. am plagued by a big issue for three weeks now.
        our technician is working full time on another...
         

        Another pivot bearing broke.

        One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
        Working...
        X